Wide-opening 2 ml, 12 x 32 mm vial Superior 33 expansion borosilicate glass Meets extremely tight tolerances I-D vial with write-on patch measures 0.5, 1.0 and 1.5 ml 1230W33 Convenience Kit contains 100 Target Snap-It Clear Vials with Clear Seals with Red PTFE/White Silicone Septa.
33 expansion borosilicate clear glass HPLC glass vials pre-slit septa 2-ml Vial Septa at Thomas Scientific Certificates enclosed with each kit Vials of clear or amber borosilicate glass with ID marking spots Closures with pre-inserted septa Each kit sealed for
The septum you choose for your autosampler vial can impact sample evaporation, sample security, needle bending and blockages, and instrument down time. Don’t let the complexities of septa selection slow you down. Use the simple online Aijiren Tech SureSTART Selection Guide to find the right septa and vial for your analysis.
˜ Precision-formed neck for improved autosampler handling. ˜ Clear glass vials - made from USP Type I, Class A, 33 Borosilicate Expansion glass. ˜ Amber glass vials - made from USP Type 1 Class B, 51 Borosilicate Glass. Part No Description Pcs/Pack SV11CN 2ml Clear vial, Crimp Top 100 SV11CW 2ml Clear vial, Crimp Top, graduated with writing
Aijiren Tech™ 9 mm Clear Glass Screw Thread Vials are 12 x 32 mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time. Vials are made from superior quality 33
Type 1, Class A, 33 expansion borosilicate glass or 51A amber glass Capacity ranges from 2mL to 40mL Provide constant pH for duration of sample storage life Chemically inert caps suitable for most chromatography and storage applications Top grade PTFE/silicone septa used for cleanliness Related Products: Vial 40ml Compare this item
All products are made from 33-expansion glass and these vials have three wavy lines. What are microvials? These are vials are suitable for use when sample volume is limited or when you need to get maximum recovery from the vial.
Vial Kit: 2mL Clear Glass Vial, 9-425 Green Polypropylene Screw Cap with 0.040" Bonded Pre-Slit PTFE/Silicone Septa, 100/pk. Sciencix Part #: 11-3554.
Aijiren Tech™ National™ and Aijiren Tech™ Chromacol™ Sample Storage Screw Thread Vials are manufactured from superior quality 33 expansion borosilicate clear (Type 1, Class A) or 51A amber (Type 1, Class B) glass. Storage vials range from 2mL to 40mL. Product Overview Showing 1 of 1 Save to list PTFE-lined solid-top storage caps
WHEATON ® clear sample vial with foil lined cap for autosampler vials 12 x 32 mm standard opening ... Kimble ® 33 Expansion Borosilicate Glass Vial With ...
Jun 9, 2022 · 2ml sample vials are made of high-quality borosilicate glass, low content of free ions, low coefficient of expansion, and very high chemical resistance. It is suitable for containing all injectable preparations with acid, neutral and alkaline pH. Temperature range from -76F to 248F.
Glass vials are made from 33-Expansion Coefficient clear borosilicate glass for exceptional resistance to chemical and temperature variations. Our 2mL 12 x 32mm standard mouth vials have a useable volume of 1.5 ml and are available in 8/425 and 9/425 screw-thread polypropylene cap style or 11 mm aluminum crimp cap style. Get PriceEnquiry
Autosampler vials are usually made from clear or amber glass, both of which are highly inert. Amber glass helps protect more sensitive samples from exposure to UV light and radiation. Vial inserts are used to reduce the capacity of the vial to accommodate smaller samples.
Aijiren Tech™ 9 mm Clear Glass Screw Thread Vials are 12 x 32 mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time. Vials are made from superior quality 33