Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Color: Green: Description: Titan3 PTFE (Hydrophilic) Syringe Filters 0.2 µm, 17 mm, 200 Pk. Disposable: Yes: Material: PTFE (Hydrophobic) Material (Membrane) PTFE (Hydrophillic) Pore Size: 0.2 μm: Sterility: Non-sterile: For Use With (Application)
Titan3 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 30 mm, with Pre-Filter, 100 Pk. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Titan3 PTFE (Hydrophobic) Syringe Filter 0.45 µm, 4 mm, 100 Pk.
Suitable for sample preparation for high performance and ultra-high performance liquid chromatography (HPLC and uHPLC). Choice of 13 mm or 25 mm syringe filter diameter to suit sample volume. Choice of 0.2 μm or 0.45 μm pore sizes for retaining a variety of particles. Suitable for rapid syringe filtration of samples up to 100 mL.
0.2 um pore size, Hydrophilic PTFE membrane, 142 mm diameter: Gas Venting Cap with 50 mm 0.2 μm PTFE Filter for Vertical Sidearm Flasks ... PTFE membrane high ...
high performance 0.2 um PTFE syringe filter for minerals Sep 28, 2021 · high performance ptfe membrane filter 0.2 um price-Voa Vial 0.45 PTFE Pink Syringe Filter. The shell of PT HOME
Durable, efficient, and broadly compatible, these pure, hydrophilic PTFE membranes are ideal for use with HPLC seperations, aqueous/organic solvents, and many of your other filtration needs. Pack of 100. Pore size: 0.20 microns. Diameter: 13 mm. Advantec P/N: H020A013A.
Omnipore Membrane Filter, 0.2 um pore size, Hydrophilic PTFE membrane, 47 mm diameter Expand Page 1 of 47 MEMBRANE FILTER CHARACTERISTICS Chemical compatibility: The filter material must be compatible with the chemical nature of both the liquid and dissolved solutes being filtered to avoid structural failure.
Whatman PTFE membrane filters from Cytiva's business are chemically stable and inert, making them suitable for use with aggressive organic solvents, strong acids, and alkalis. The TE range features polypropylene support material for improved strength and handling. Temperature resistant up to 120°C. Can withstand aggressive solvents, liquids
This 25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing Filter is non-sterile,
All filter capsules are 100% integrity tested to ensure filter performance each and every time out of the package. Sterlitech PTFE filter capsules are well suited for critical applications where superior flow and particle removal efficiency at 0.1, 0.2, 0.45 and 1.0 micron is required. FEATURES AND BENEFITS. Naturally Hydrophobic PTFE Membrane
1. Airflow values calculated assuming linear relationship between volumetric airflow and differential pressure. 2. Water flows measured after prewetting with alcohol and calculated assuming linear relationship between flow and differential pressure. 3. Bubble points for 0.2µm, 0.45µm, and 3.0µm pore sizes measured using IPA; all others
Foxx Life Sciences. EZFlow 25mm, 47mm, and 90mm membrane disc filters are used to retain particles or microorganisms by surface capture. The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Hydrophobic PTFE membrane is bonded to a polypropylene support and due to its extreme chemical.
The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situ steaming conditions in either the forward or reverse direction.
pore size 0.2 μm, cartridge nominal length 20 in. (50 cm), Code 7 (2-226; O-rings w/locking-tabs) Expand. Hide. D00273S01. pore size 0.2 μm, cartridge nominal length 30 in. (75 cm), Code 7 (2-226; O-rings w/locking-tabs) Expand.