Description. Pricing. D00272T01. pore size 0.2 μm, cartridge nominal length 20 in. (50 cm), Code 7 (2-226; O-rings w/locking-tabs) Expand. Hide. D00273S01. pore size 0.2 μm, cartridge nominal length 30 in. (75 cm), Code 7 (2-226; O-rings w/locking-tabs) Expand.
Membrane filters are typically composed of polymers that have been chemically processed, resulting in highly porous thin films with microscopic pore structures. Membrane filters typically have absolute pore size ratings <1µm, with some exceptions.
Filter PTFE Membrane 0.2µm Pk5 DWK Life Sciences (Wheaton) Interchangeable hydrophobic membrane filter guarantees effective protection against airborne contamination during aspiration and dispensing. Compare this item Vented Top VersaCap® 53B with .2µm PTFE Membrane Foxx Life Sciences
Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Simple, rapid and reliable ultracleaning . Feature a coating-free, hydrophobic PTFE membrane that is chemically inert
Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.
Membrane filters are typically composed of polymers that have been chemically processed, resulting in highly porous thin films with microscopic pore structures. Membrane filters typically have absolute pore size ratings <1µm, with some exceptions.
Aijiren Tech Nalgene. Side-arm has a quick-disconnect tubing adapter and blue collar. Model 1234K62 filter cap has a 500 mL capacity and fits a 33 mm neck size bottle. Model 1234K63 filter cap has a 500 mL capacity and fits a 45 mm neck size bottle. Both filters have 75 mm diameter membranes with a 0.2 µm pore size.
WHAGN203NPEORGSP: supplied with single vial compressor, PTFE membrane, pore size 0.2 μm, clear vial color, pack of 100: Expand
The single-layer hydrophobic PTFE membrane is self-dewetting and therefore provides high air flow rates even at very low differential pressures over an extended
Designed for easy handling and maximum safety in air filtration. Sartorius™ Midisart™ 2000 PTFE Air Filter entirely eliminates moisture breakthrough because of its inherently hydrophobic PTFE membrane reinforced with polypropylene gauze. Stepped hose barb connectors ensure a simple and secure hold.
Sartorius Minisart™ NML Syringe Filters, Sterile eliminate time consuming preparatory work, such as changing out the filter and cleaning the filtration system. Brand: Sartorius 16534----------K Code : 53 Additional Details : Weight : 0.37800kg View more versions of this product Product Code. 10509821 £231.00 / Pack of 50 Quantity
Fluoropore™ Membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support. (Catalogue numbers containing ""FHUP"" have no backing.) Fluoropore™ Membranes provide broad chemical compatibility, high flow rates and consistency. Omnipore™ Membrane is hydrophilic PTFE compatible with
biological fluids and gases is usually done with 0.2 or 0.22 µm pore filter membranes. Clarification and prefiltration of solutions and solvents is best accomplished with 0.45 µm or larger filter membranes. Prefiltration to improve filter performance can also be accomplished by the use of glass fiber prefilters that can be purchased separately.
Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size 0.2 µm, Non-Sterile, Female Luer Lock, Male Luer Slip, Pack Size 500 Tech Support Documents Minisart ® Air with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12.
Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.