Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high Related Products: Hydrophobic Filter Compare this item

0.2 µm µm nominal Diameter (Metric) 13 mm Effective Filtration Area (Metric) 1 cm² Filter Media Hydrophobic PTFE membrane on a polypropylene support Hold-Up Volume <30 µL Housing Material polypropylene Maximum Operating Pressure (bar) 6.9 bar Maximum Operating Temperature (Metric) 100 °C Typical Flow Rate 245 mL/min at 1.0 bar (100 kPa, 15 psi)

13mm 0.22 um syringe filter Corning-Analytical Testing Vials Dec 02, 2021 · Corning ptfe membrane filter 0.2 um for medicine-Voa Vial Red PTFE (Hydrophilic) Syringe Filters, 0.22 µm, 13 mm. Hydrophilic PTFE syringe filters have broad chemical compatibility and high pH resistance and are optically clear when wet with water.

Whatman® GD/Xシリンジフィルター PTFE membrane, pore size 0.2 μm, diam. 13 mm, non-sterile, pk of 150 ea; Synonyms: Z277290; find -WHA68741302 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich

Buy and find information on Whatman PFTE membrane filters from Sigma-Aldrich.com, product number Z134171. 0.22 µm pore size, hydrophobic PTFE, 47 mm membrane.

PTFE membranes provide the best chemical resistance. These naturally hydrophobic membranes can be used for venting applications or filtering gases. 100% integrity tested, sterile and certified nonpyrogenic and noncytotoxic. Manufactured in accordance with ISO 9002 standards. Corning syringe filters are 100% integrity tested and are certified

Description. 0.2 µm, 13 mm (75/pkg), Pall 0.2 µm, 13 mm (75/pkg) “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please contact

PTFE membranes provide the best chemical resistance. These naturally hydrophobic membranes can be used for venting applications or filtering gases. 100% integrity tested, sterile and nonpyrogenic and noncytotoxic. Manufactured in accordance with ISO 9001 standards. $162.95 per case.

Specifications Membrane: HPLC certified PTFE, w/polypropylene support Maximum operating temperature: 110 °C Housing: Medical grade, virgin polypropylene Autoclave: Sterilize by dry heat at 121 °C for 15 minutes Applications HPLC and organic-solvent sample preparation and clean-up Dissolution sample analysis General sample preparation

Millex针式过滤器，Fluoropore® PTFE，疏水，非无菌 0.20 µm pore size, 25 mm diameter, Millex-FG hydrophobic PTFE membrane, for gas filtration and venting applications; Synonyms: Millex-FG Filtereinheit, 0,20 µm, hydrophobes PTFE, 25 mm; find Millipore-SLFG02550 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich

PTFE Unlaminated Membrane Filters, 0.2 micron, 13mm, 50/Pk Product code PTU021350 PTFE Unlaminated Membrane Filters, 0.2 micron, 13mm, 50/Pk - PTU0 JavaScript seems to be disabled in your browser.

13 mm Effective Filtration Area (Metric) 1 cm² Filter Media Hydrophobic PTFE membrane on a polypropylene support Hold-Up Volume <14 µL Housing Material polypropylene Maximum Operating Pressure (bar) 6.9 bar Maximum Operating Temperature (Metric) 100 °C Quantity 100 pkg Typical Flow Rate 245 mL/min at 1.0 bar (100 kPa, 15 psi) Overview Description

Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the cartridges remove fragments that would otherwise

Polytetrafluorethylene (PTFE) membranes are naturally and permanently hydrophobic. They are ideal for filtering gases, including humidified air. The extreme chemical resistance of PTFE membranes makes them very useful for filtering solvents or other aggressive chemicals for which other membranes are unsuitable.

Sep 28, 2021 · high performance 0.2 um ptfe syringe filter for venting 6766-1302 - Puradisc 13 PTFE Syringe Filter 13mm Whatman 6766-1302 syringe filter Puradisc 13 13mm diameter 0.2um pore size polytetrafluoroethylene PTFE (pack of 2000) Product code: 6766-1302 Additional discounts available for bulk purchases and standing / call off orders - please request