0.2 Micron PTFE Filter With absolute pore size of 0.2 micron, Filson filter can remove smaller particles like bacteria with high efficiency more than 99.99%. Besides, our 0.2 micron PTFE filter has larger surface area and its capacity can reach 100 ml. Send Inquiry Now 0.22 Micron PTFE Filter

1) Syringe filter housings are manufactured from solvent-resistant, low-extractable polypropylene resins specifically selected for wide compatibility with common HPLC sample matrices. 2) Solutions at temperatures up to 100°C can be filtered using syringe filters. 3) Syringe filters can be sterilized by autoclave at 125°C for 15 minutes.

Filson 0.22 micron PTFE filter is ideally designed to remove most contaminants, especially bacteria. Our 0.22 micron PTFE filter can be made of booth hydrophobic and hydrophilic PTFE, so you can choose appropriate material based on your unique application. Material: Polytetrafluoroethylene ( PTFE) Micron Rating: 0.22 micron Porosity: 85%

Ideal for use with reactive and corrosive chemicals. The melting point of PTFE 1 is 600°K (327°C / 620°F) Low temperature: maintains high strength, toughness and self-lubrication as low as 5°K (-268°C /-450°F) and good flexibility at 194°K (-79°C / -110°F) NOT compatible with certain alkali metals and fluorinating agents such as xenon

Medical Millex-GV Syringe Filter Unit, 0.22 µm, PVDF, 33 mm, gamma sterilized, A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Comes in a pack of 50. 0.22 μm pore size Expand SLGVV255F Millex-GV Filter, 0.22 µm, A 25 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane.

for filtering gases, including humidified air. The extreme chemical resistance of PTFE membranes makes them very useful for filtering solvents or other aggressive chemicals for which other membranes are unsuitable. Because of their hydrophobicity, PTFE membranes must be prewetted with a solvent, such

Aug 7, 2018 · A depth filter, glass microfiber is made from 100% borosilicate glass, highly inert, and often used as a prefilter. It’s resistant to temperatures up to 500°C and a very wide range of solvents.

Omnipore Membrane Filter, 0.2 um pore size, Hydrophilic PTFE membrane, 47 mm diameter 0.2 μm pore size 80 % porosity Page 1 of 24 Membrane Filter Characteristics Chemical Compatibility: The filter material must be compatible with the chemical nature of the substance being filtered to avoid structural failure.

Determined by ignition of the cellulose filter at 900°C in air. Minimizing ash content is essential in gravimetric applications and also a useful measure of the level of general purity. Chemical compatibility It is very important to ensure that the structure of the filter media will not be impaired by exposure to certain chemicals.

Nov 16, 2021 · Description. Millex-GV Syringe Filter Unit, 0.22 µm, PVDF, 33 mm, gamma sterilized. Background Information. Available in 4, 13, 25, 33, and 50 mm diameters with a variety of membranes, Millex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. date: 2021-11-16.

Syringe Filters Hydrophilic PTFE 25MM 0.22um Micron Specifications: OD is 25mm, 0.22 micron Material: Hydrophilic PTFE Syringe filter applied to a small sample of laboratory filtr

The benefit summary of micropore membrane pleated filter cartridge: high retention rate, large flow rate, low pressure and wide chemical compatibility. It adopts thermal-bonding technique, without adhesive and no pollution to products. The products meet the production demand of food, beverage, beer, chemical and pharmaceutical industry.

Aug 7, 2018 · Regenerated Cellulose (RC) Membrane. A versatile cellulose-based hydrophilic membrane that is resistant to a very large range of solvents, including aqueous solutions and organic solvents. Recommended for use in HPLC and protein recovery applications. DO USE: with most common solvents, including those used in HPLC.

Totally made of PTFE, our 0.22 micron PTFE syringe filter has a robust construction to withstand high temperature and pressure. Material: polytetrafluoroethylene ( PTFE) Micron Rating: 0.22 micron Sterility: non-sterile Working Temperature: up to 130℃ Maximum Operating Pressure: 5.5 bar Surface Area: 19.6 cm 2 General Diameter: 13mm, 25mm, 50mm

Durapore® Membrane Filter, 0.22 µm GVWP04700 Millipore Durapore® Membrane Filter, 0.22 µm Download Zoom 0.22 µm pore size, hydrophilic PVDF, 47 mm membrane Durapore® Membrane Filter, 0.22 µm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. SDS Data Sheet View Products on Sigmaaldrich.com