Filter PTFE Membrane 0.2µm Pk5 DWK Life Sciences (Wheaton) Interchangeable hydrophobic membrane filter guarantees effective protection against airborne contamination during aspiration and dispensing. Related Products: Membrane Filter Compare this item PTFE Filter Membranes MilliporeSigma Synonym: 1.5um PFTE filter membranes, 47mm, pk10

PTFE Membrane Disc Filters - 2 µm, 37 mm (50/pkg) Product ID R2PJ037 Material PTFE with PMP (polymethyl- pentene) support ring Air flow rate (0.7 bar (70 kPa,10 psi) 53 L/min/cm² Typical Aerosol Retention 99.99 % Unit of Measure PAC Min Order Qty 1 List Price $ 497.77 Add to Cart Add to Quote PTFE Membrane Disc Filters - 2 µm, 47 mm (50/pkg)

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. Item no.: 11807--47------N. Price (USD): $493.00. 100 Pieces.

0.2 µm µm nominal Filter Size 25 mm Diameter (Metric) 25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 2.1 bar Maximum Operating Temperature (Metric) 100 °C Quantity 50 pkg Typical Flow Rate 245 mL/min at 1.0 bar (100 kPa, 15 psi)

Whatman Nuclepore Hydrophilic Membrane, 0.2 µm Pore Size, 25 mm Circle, 100 Pack, 10417006 Regular Price $113.53 Price $98.72 Add to Cart Whatman 10400112, AE99 8.0 um 47MM 100/PK Regular Price $253.25 Price $220.22 Add to Cart Whatman Anodisc Circle with Support Ring, 25 mm diameter, 0.02 um pore size (50/pk) 6809-6002

Our Omnipore™ membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions. Features & Benefits: - Biologically and chemically inert. - High porosity yields high flow rates. - Hydrophobic and hydrophilic PTFE varieties available for filtration of aqueous and organic-based samples.

Syringe filters and membranes for the removal of interfering materials and fine particles prior to injection; includes filters both with and without syringes; suitable for both aqueous and aqueous-organic samples; often constructed from PVDF or PTFE. Filter By category Filters and Filtration Syringeless and Syringe Filters brands

Description. PTFE Membrane Disc Filters - TF 200, 0.2 µm, 293 mm (25/pkg) “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please email

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

MILLEX® Sterile Syringe Filters Hydrophilic PTFE Membranes MilliporeSigma A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50 Related Products: Hydrophilic Filter Compare this item

Material (Membrane) PTFE: Color: Natural: Material: HDPE: Diameter (Metric) Membrane: 2.5 cm: For Use With (Application) Clarifying of aqueous and organic solutions with high particulate levels, analytical sample prep: Sterility: Non-sterile: Filtration Area: 3.9 cm 2: Includes: Two different media, one graduated glass fiber prefilter, one 0.45

These hydrophobic PTFE membrane filters are laminated onto polypropylene netting for improved strength and handling. Due to broad chemical compatibility and excellent water repellency, they are ideal for solvent filtration, phase separations, venting, and air sampling.

PTFE Membrane For Venting Applications PTFE membranes are hydrophobic in nature and are effective barriers to microbes and particulate matter. The high titer reduction and water intrusion pressures allow the membrane to repel high surface tension liquids while venting gases.

Ultradyne ® absolute-rated polytetrafluoroethylene (PTFE) membrane filters offer the highest level of assurance of chemical compatibility and filtration performance in aggressive chemicals, prolonged hot air service and other severe process conditions. Ultradyne ® filters’ PTFE membrane delivers superior flow rates and long service life.

Our unsupported, hydrophobic, PTFE membrane filters are ideal for sterilization and venting applications involving air, gasses, and solvents/acids incompatible with most other filters. These PTFE filters are chemically and biologically inert, stable up to 260°C, and will withstand the majority of concentrated acids and bases and are especially